Mirka
Mirka Autonet Sanding Discs 150mm (50 Pack)
On a bonnet or a door skin the 150mm disc is the one that pays, because every pass covers more ground and you spend less time overlapping. The Mirka Autonet Sanding Discs 150mm are the 150mm size in Mirka's refinishing...
ā¬33.99 incl. VAT
ā¬27.63 excl. VAT
Mirka Goldflex Soft Sanding Roll 115x125mm (25m)
The same foam backed abrasive as the Goldflex pads, bought by the roll instead of by the packet. If you are getting through them, this is the cheaper way to hold them. The Mirka Goldflex Soft Sanding Roll 115x125mm is...
ā¬57.99 incl. VAT
ā¬47.15 excl. VAT
Mirka Abranet Sanding Strips 81x133mm (50 Pack)
A rectangular plate lets you work a straight run and come right up to a line, which is where most of the time goes on a flush door, a window board or a run of skirting. The Mirka Abranet Sanding...
ā¬45.99 incl. VAT
ā¬37.39 excl. VAT
Mirka Goldflex Soft Sanding Pads 115x140mm (10 Pack)
A flat block on a moulding does one of two things: it rides the high points and never touches the hollow, or it cuts straight through an arris. Neither is what you wanted. Mirka Goldflex Soft Sanding Pads 115x140mm are...
ā¬9.99 incl. VAT
ā¬8.12 excl. VAT
Mirka Abranet Sanding Discs 225mm (25 Pack)
Filler on a skimmed wall or ceiling has to come flat, and the dust has to go somewhere other than the room you are standing in. That is the job this disc was built for. The Mirka Abranet Sanding Discs...
ā¬57.99 incl. VAT
ā¬47.15 excl. VAT
Mirka Autonet Sanding Discs 125mm (50 Pack)
Refinishing punishes an abrasive differently to decorating. Fresh primer and soft paint load a disc fast, and once it loads it stops cutting and starts burnishing. The Mirka Autonet Sanding Discs 125mm are the line Mirka developed for automotive refinishing....
ā¬34.99 incl. VAT
ā¬28.45 excl. VAT
Mirka Abranet Sanding Rolls 2.5m
Every so often the job needs a shape no pre-cut abrasive comes in. A long thin strip for a glazing bar, a wrap round a handrail, a piece sized to a block you have had for twenty years. That is...
ā¬23.50 incl. VAT
ā¬19.11 excl. VAT
Mirka Abranet Sanding Strips 80 x 230mm (10 Pack)
One abrasive, two tools. The 80 by 230mm strip is the format the Mirka hand block takes and the format the DecoSander takes on its rectangular pad, so a single box covers hand work at the bench and pole work...
ā¬19.99 incl. VAT
ā¬16.25 excl. VAT
Mirka Deros Backing Pad 150 mm 5/16-Inch - Grip
If the abrasive has started creeping under load, or it drops off when you lift the machine off the work, the pad is finished. Hook and loop wears out before anything else on a sander does. The Mirka Deros Backing...
ā¬52.99 incl. VAT
ā¬43.08 excl. VAT
Mirka Handy Sanding Block with Extraction 80x230mm
Most filler gets flatted by hand, and most of that dust ends up in the room. This is the hand block that takes it away instead. The Mirka Handy Sanding Block with Extraction 80x230mm is Mirka's hand block for putty...
ā¬29.99 incl. VAT
ā¬24.38 excl. VAT
Mirka
ā¬590.00 incl. VAT
ā¬479.67 excl. VAT
Mirka Deros II 650 Sander 150mm - 5.0 Orbit Electric Sander
A random orbital sander earns its keep on flat work: doors, panels, worktops, a long run of MDF. The 150mm pad is the one that covers ground. The Mirka Deros II 650 Sander 150mm is Mirka's 150mm direct electric random...
ā¬590.00 incl. VAT
ā¬479.67 excl. VAT
Mirka Pad Saver 67 Hole - 150mm
The 150mm backing pad on a Deros 650 is a part you would rather replace once than three times. This is the layer that makes that happen. The Mirka Pad Saver 67 Hole 150mm is a thin sacrificial disc that...
ā¬11.99 incl. VAT
ā¬9.75 excl. VAT
Mirka Interface 81 x 133 mm 54H (5 Pack)
Window frames and panel doors are the work the DEOS 353 was built for, and they are also the work where a bare plate cannot reach the shape. The interface is the foam that fixes that. Mirka Interface 81 x...
ā¬61.99 incl. VAT
ā¬50.40 excl. VAT
Mirka Abranet Sanding Discs 125mm (50 Pack)
125mm is the everyday random orbital size, and this is the grit set that takes it past preparation and into finishing. The Mirka Abranet Sanding Discs 125mm are the net abrasive for a 125mm machine: the Deros 550, or the...
ā¬34.99 incl. VAT
ā¬28.45 excl. VAT
Mirka Profile Foam Interface 81x133x25mm
A 7mm interface follows a shallow curve. It will not get into the hollow of a moulding. For that you need a lot more foam, and this is 25mm of it. The Mirka Profile Foam Interface 81x133x25mm is a deep...
ā¬28.99 incl. VAT
ā¬23.57 excl. VAT
Mirka Mini File 20 x 42mm
A run in gloss or a bit of grit that dried into the film does not need sanding back. It needs the defect taken off flush and nothing else touched. That is a specific job and this is the specific...
ā¬27.50 incl. VAT
ā¬22.36 excl. VAT
Mirka
ā¬620.00 incl. VAT
ā¬504.07 excl. VAT
Mirka DEOS II 353 81x133mm - 3.0 Orbit Electric Sander
Joinery work is mostly flat panels with edges and rebates round them: doors, sashes, sills, stairs, a set of kitchen fronts. A round pad handles the middle of a panel and then fights you at every edge. The Mirka DEOS...
ā¬620.00 incl. VAT
ā¬504.07 excl. VAT
Mirka Abranet 100x152x152mm Grip (50 Pack)
Corners, mitres and the inch of wall above a skirting board are where a round disc runs out of ideas. That is what the delta shape is for. Mirka Abranet 100x152x152mm Grip is the delta net abrasive for the DEOS...
ā¬58.99 incl. VAT
ā¬47.96 excl. VAT
Mirka Shark Blade 48 x 28mm
A speck of dust that landed in wet lacquer leaves a hard nib standing proud of an otherwise good finish. Sand it and you flat the gloss around it. Shave it and you have only touched the nib. The Mirka...
ā¬46.99 incl. VAT
ā¬38.20 excl. VAT
Mirka Paint Strainers 190 micron (250 Pack)
Everything that ends up as a bit in a sprayed finish was in the paint before it reached the gun. Skinned material off the side of the tin, a flake off the lid, dried colour from the stirrer. Straining takes...
ā¬29.99 incl. VAT
ā¬24.38 excl. VAT
Mirka Deros Backing Pad 125mm 5/16-Inch - Grip
The backing pad is the most expensive consumable on a sander and the one people run until it stops holding abrasive. Once the hook has gone furry, the disc creeps under load and the sanding pattern goes with it. The...
ā¬59.99 incl. VAT
ā¬48.77 excl. VAT
Mirka Hose for Hand Sanding Blocks 20mm x 4m
The hand sanding blocks take a different hose from the machines. This is the one they take. The Mirka Hose for Hand Sanding Blocks 20mm x 4m is the 20mm extraction hose for Mirka's hand blocks and the hand sanding...
ā¬26.99 incl. VAT
ā¬21.94 excl. VAT
Mirka
ā¬34.99 incl. VAT
ā¬28.45 excl. VAT
Rigalit Dust Bag Fleece for Mirka Dust Extractor 30L (5 Pack)
The bag is what stands between sanding dust and the extractor's filter. Let it blind over and the suction drops long before the drum looks full. Rigalit Dust Bag Fleece for Mirka Dust Extractor 30L is a five pack of...
ā¬34.99 incl. VAT
ā¬28.45 excl. VAT
Mirka Deos Backing Pad 81 x 133mm - Grip
The backing pad is the part that wears out quietly. Once the hook and loop stops holding, the abrasive creeps under load and the sanding pattern goes with it. The Mirka Deos Backing Pad 81 x 133mm is the replacement...
ā¬37.99 incl. VAT
ā¬30.89 excl. VAT
Mirka Hose with Connector 27mm x 4m
A sander with the extraction disconnected is just a dust pump. This is the hose that joins the two. The Mirka Hose with Connector 27mm x 4m is an antistatic extraction hose for Mirka machines and extractors that take a...
ā¬69.99 incl. VAT
ā¬56.90 excl. VAT
Mirka Case 400x300x158mm Yellow
Machines that live loose in a van do not last. A 590 euro sander rattling against a tin of filler will lose its pad, its cable and eventually its bearings. The Mirka Stackable Case is Mirka's own hard case, 400...
ā¬79.99 incl. VAT
ā¬65.03 excl. VAT
Mirka Interface 150mm 67H 10mm (5 Pack)
The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The interface pad is placed between the backing...
ā¬59.99 incl. VAT
ā¬48.77 excl. VAT
Mirka DecoSander 80 x 230mm & 225mm
A ceiling sanded off a hand block means a ladder, and a ladder means moving it every two square metres. A pole sander keeps you on the floor. One with extraction on it keeps the dust out of the room...
ā¬269.99 incl. VAT
ā¬219.50 excl. VAT
Mirka Pad Saver 100x152x152mm For DEOS 663 (5 Pack)
On a delta machine all the pressure ends up at the front corner, so that is where the plate dies first. The tip goes furry, the abrasive stops gripping at exactly the point you are using most, and the pad...
ā¬27.99 incl. VAT
ā¬22.76 excl. VAT
Mirka Leros Pad Saver 225mm 25H
Pad saver for Mirka Leros 225mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad...
ā¬28.99 incl. VAT
ā¬23.57 excl. VAT
Mirka Interface 125mm - 33 Hole (1 Pack)
A flat pad on a curved surface touches it in one line. An interface is the foam cushion that makes the abrasive follow the shape instead. The Mirka Interface 125mm 33 Hole goes between the backing pad and a Grip...
ā¬15.99 incl. VAT
ā¬13.00 excl. VAT
Mirka
ā¬45.00
ā¬36.00 incl. VATā¬36.59
ā¬29.27 excl. VAT
Mirka Gold 100x152x152mm Grip 7 Holes (50 Pack)
Net abrasive is the better thing on filler and fresh paint, and it costs accordingly. On bare timber, old dry paint and general preparation, paper does the job for less. Mirka Gold 100x152x152mm Grip 7 Holes is the paper delta...
ā¬45.00
ā¬36.00
Mirka
ā¬47.99 incl. VAT
ā¬39.02 excl. VAT
Mirka Dust Bag Fleece for Mirka Dust Extractor 1230 (5 Pack)
The bag is the cheapest part of a dust extractor and the one protecting the expensive part. Once it blinds over, the filter behind it starts doing the work, and filters cost a great deal more than bags. Mirka Dust...
ā¬47.99 incl. VAT
ā¬39.02 excl. VAT
Mirka Leros Interface 225mm 25H 5mm (1 Pack)
No wall is flat. Plaster rolls, boards meet at a slight step, and a 225mm head run dry on a long pole will find every one of them and leave a mark where it caught. The Mirka Leros Interface 225mm...
ā¬34.99 incl. VAT
ā¬28.45 excl. VAT
Mirka Pad Saver 125mm 33 Hole (1 Pack)
A pad saver is the cheapest insurance on a sander. It is a thin disc that goes between the backing pad and the abrasive, and its only job is to be destroyed instead of the pad. The Mirka Pad Saver...
ā¬11.99 incl. VAT
ā¬9.75 excl. VAT
Mirka
ā¬799.00
ā¬750.00 incl. VATā¬649.59
ā¬609.76 excl. VAT
Mirka DEROS II 5650 125/150mm 5.0mm
Buying one pad size means deciding in advance what sort of work is coming in. The 5650 is Mirka's answer to that: the same DEROS II machine, supplied with both pads in a case. The Mirka DEROS II 5650 125/150mm...
ā¬799.00
ā¬750.00
Mirka
ā¬1,599.00
ā¬1,399.00 incl. VATā¬1,300.00
ā¬1,137.40 excl. VAT
Mirka Leros 950CV 225mm Wall & Ceiling Sander Kit
Sanding a ceiling off a pole is the job on every quote that nobody wants. The Leros is a 1.44 metre powered wall and ceiling sander built to do it standing on the floor. The Mirka Leros 950CV 225mm Wall...
ā¬1,599.00
ā¬1,399.00
Mirka Dust Extractor 1230 L AFC Automatic 230V
For the sanding where nobody has written āM-classā on the spec (softwood, general site dust, flatting filler and paint on walls and ceilings), an L-class extractor does the job, and does it with more pull than most people expect. The...
ā¬750.00 incl. VAT
ā¬609.76 excl. VAT
Mirka Interface 125mm 44H (5 Pack)
Mirka make their 125mm interfaces in two hole patterns, and the one you need is decided by the backing pad on your machine, not by the sander. The Mirka Interface 125mm 44H is the 44 hole pattern, in a five...
ā¬54.99 incl. VAT
ā¬44.71 excl. VAT
Mirka
ā¬590.00 incl. VAT
ā¬479.67 excl. VAT
Mirka Deros II 550 Sander 125mm - 5.0 Orbit Electric Sander
Not every job is a flat panel. Window sashes, door frames, spindles, furniture: on that work a smaller pad is quicker, because you spend less time steering round things. The Mirka Deros II 550 Sander 125mm is the 125mm pad...
ā¬590.00 incl. VAT
ā¬479.67 excl. VAT
Mirka Pad Saver 125mm 33 Hole (5 Pack)
Five pad savers, because one is never the right number of a part you are supposed to throw away. Mirka Pad Saver 125mm 33 Hole in a five pack: 3mm sacrificial discs that sit between the backing pad on a...
ā¬28.99 incl. VAT
ā¬23.57 excl. VAT
Mirka Edge Protector for 150mm Deros Sander
Run a 150mm sander along a skirting or into the corner of a reveal and it is the rim of the pad that makes contact. A few passes of that and the edge of the pad is chewed, which is...
ā¬19.99 incl. VAT
ā¬16.25 excl. VAT
Mirka Backing Pad Net 100x152x152mm 32H
On a delta sander the pad takes an uneven beating. The tip does most of the work and wears out first, and once the point stops gripping the abrasive the machine has lost the only thing it does better than...
ā¬49.99 incl. VAT
ā¬40.64 excl. VAT
Mirka
ā¬608.99 incl. VAT
ā¬495.11 excl. VAT
Mirka DEOS II 663 Delta 100x152x152 - 3.0 Orbit Electric Sander
Every painted staircase has spindles and every sash window has glazing bars. Somewhere on most jobs there is a mitre, an internal corner or a moulding no flat machine will reach, and that is where the time goes. The Mirka...
ā¬608.99 incl. VAT
ā¬495.11 excl. VAT
Mirka HEPA Filter for DEXOS Dust Extractors
The standard DEXOS filter holds the machine to M-class, 99.9% of dust. For the work where that is not enough, the Mirka HEPA Filter for DEXOS takes the final filtration to 99.97% at 0.3 microns: the very fine fraction from...
ā¬79.99 incl. VAT
ā¬65.03 excl. VAT
Mirka
ā¬1,099.00 incl. VAT
ā¬893.50 excl. VAT
Mirka DEXOS 1217 M AFC Dust Extractor 17L with Hose & Sleeve 4m
The carry-everywhere DEXOS, complete. The 17 litre 1217 with the 4 m hose and the Mirka sleeve in the box. Open it, plug in the sander, and you are extracting. For a decorator working room to room, this is the...
ā¬1,099.00 incl. VAT
ā¬893.50 excl. VAT
Mirka DEXOS 1217 M AFC Dust Extractor 17L (No Hose)
The compact DEXOS, for the jobs where the extractor goes up the stairs, into the van and out again every day. Same motor and the same pull as the 30 litre 1230, in a 17 litre body that weighs 13...
ā¬899.99 incl. VAT
ā¬731.70 excl. VAT
Mirka
ā¬1,799.00 incl. VAT
ā¬1,462.60 excl. VAT
Mirka DEXOS 1230 M AFC Dust Extractor 30L with Hose & Sleeve 4m
The 30 litre DEXOS, ready to run from the box. Same machine as the base unit (1,200 W brushless motor, automatic filter cleaning, M-class filtration, two auto-start sockets) with the 4 m hose and the Mirka sleeve already in the...
ā¬1,799.00 incl. VAT
ā¬1,462.60 excl. VAT
Mirka
ā¬1,399.00 incl. VAT
ā¬1,137.40 excl. VAT
Mirka DEXOS 1230 M AFC Dust Extractor 30L (No Hose)
Sanding plasterboard, MDF, hardwood or old paint, the dust off the sander is the health-and-safety line item on the job, and an L-class extractor does not meet it. This is the machine for the sites that specify M-class. The Mirka...
ā¬1,399.00 incl. VAT
ā¬1,137.40 excl. VAT
Mirka Clean-Up Kit 32mm for Dust Extractors
An M class extractor is the best vacuum on most sites, and most of them spend the day connected to a sander and then watch somebody sweep up with a brush. This is Mirka's clean-up kit for their dust extractors,...
ā¬160.00 incl. VAT
ā¬130.08 excl. VAT
Mirka ā Precision Tools for Professional Surface Finishing
Mirka is a global leader in surface treatment solutions, offering cutting-edge equipment for woodworking, automotive refinishing, and industrial applications. With a focus on efficiency and innovation, the brand delivers high-performance abrasives, electric tools, and dust extraction systems designed to enhance workflow and improve results.
Explore a Wide Range of Mirka Abrasives & Equipment
Achieve smooth and consistent results with high-quality finishing materials. Whether working on fine details or large-scale projects, Mirka's selection includes everything from sanding pads and blocks to advanced electric systems that ensure effortless operation and precision.
The Mirka DEOS II 663 Delta Ā 100x152x152 3.0 Orbit is a compact and powerful detail sander, designed to reach tight spaces while delivering a uniform surface texture. For an even more seamless workflow, the Mirka DEROS Backing Pad Ā 125mm 5/16 Grip provides a secure fit for abrasives, ensuring maximum contact with surfaces and reducing material waste.
When working on larger areas, the Mirka DEROS II 5650 Ā 125/150mm 5.0mm is a versatile option, offering minimal vibration and excellent dust extraction compatibility. Pairing this machine with Mirka abrasive discs optimizes performance, reducing time spent on each stage of the process.
Efficient Dust Extraction & Workspace Maintenance
A clean environment is key to achieving flawless finishes. The Mirka Dust Extractor 1230 L AFC Automatic 230V actively removes fine particles, keeping workspaces free from airborne debris. With an automatic filter cleaning system, this powerful extractor supports uninterrupted operation while extending the life of abrasives.
Why Choose Mirka Surface Finishing Tools?
-
Advanced Technology ā Innovative engineering ensures efficiency and reliability.
-
Durability & Performance ā Long-lasting abrasives deliver consistent results.
-
Ergonomic & Lightweight Design ā Reduces strain, improving handling over extended use.
-
Multi-Purpose Application ā Suitable for woodworking, automotive refinishing, and industrial tasks.
Order Professional Mirka Abrasives & Tools at PaintLab
At PaintLab, you'll find a comprehensive selection of Mirka sanding block options, sanding pads, and precision-engineered abrasives suited to both professionals and home users. Whether refining intricate details or preparing surfaces on a larger scale, these tools offer the ideal balance of performance and comfort.
Browse our collection and enjoy fast delivery across Ireland!
