My Cart

Filling is a two-stroke job. The first stroke presses material into the hole, the second takes the surplus off flush. A 3 inch blade is the width that does both on the damage you actually meet on site: screw holes,...

The standard DEXOS filter holds the machine to M-class, 99.9% of dust. For the work where that is not enough, the Mirka HEPA Filter for DEXOS takes the final filtration to 99.97% at 0.3 microns: the very fine fraction from...

The compact DEXOS, for the jobs where the extractor goes up the stairs, into the van and out again every day. Same motor and the same pull as the 30 litre 1230, in a 17 litre body that weighs 13...

The coloured topcoat for the Amotherm fire protection system, and the second half of it — not optional. Amonn Amotherm Wood 451 SB Topcoat is a two-component, solvent-based polyurethane in a matt finish (12–18 gloss), tinted to your RAL or...

The same certified fire protection as the clear Amotherm system, for timber that is going to be painted a colour rather than left as wood. Amonn Amotherm Wood 451 SB Basecoat is the pigmented, white version of the fire-retardant basecoat...

The second half of the system, and not optional. Amonn Amotherm Wood 450 SB Topcoat is the transparent two-component polyurethane that seals and protects the fire-retardant basecoat. The classification is for the pair — a basecoat left uncovered is not...

Timber ceilings, wall panelling and cladding in a public or commercial building usually have to meet a reaction-to-fire class before a fire officer will sign them off. This is the coating that gets untreated wood to Euroclass B-s1,d0 — and...

New exterior timber drinks. Left bare it takes on water at every end grain and every saw cut, and the first winter opens it up — which is why a stain or an opaque paint put straight onto raw wood...

Fourteen inches of sleeve is a decision about pace. On a long wall or a big ceiling it takes the number of passes down and keeps a wet edge alive, which is what stops a lap mark showing up later...

The tool that lives in your back pocket and comes out forty times a day — scraping a run before it sets, raking out a crack, opening a tin, pulling a roller sleeve clean. The Ole 3 Inch Stainless Steel...

The job a big airless is wrong for: a single door, a run of skirting, a radiator, the back of a bookcase, a piece of furniture in the workshop. Setting up a floor-standing machine for that takes longer than the...

This 12-inch microfibre paint roller sleeve is a wide sleeve for covering walls and ceilings quickly, available in two pile depths to match the surface. Suited to both trade decorators and DIY users tackling larger rooms. The microfibre fabric picks...

This 9-inch microfibre paint roller sleeve is a general-purpose sleeve for walls and ceilings, available in two pile depths to match the surface. Suited to both trade decorators and DIY users. The microfibre fabric picks up paint well and releases...

This 14-inch (350mm) roller sleeve is a wide, deep-pile sleeve built to cover large rough and textured surfaces fast, suited to trade decorators and serious DIY users tackling exterior jobs. Its 25mm (1 inch) nap holds an exceptional volume of...

This angled sash brush is built for precise cutting in around door and window frames, making it a reliable choice for both trade decorators and confident DIY painters. Its tapered, bevelled head lets you run a clean, controlled line along...

This stainless steel skimming blade is built for feathering plaster and drywall joints to a smooth, track-free finish, suiting both trade plasterers and confident DIY decorators. It handles the key finishing stages — taping and bedding joints, feathering compound over...