Sanding Tool Accessories
Mirka Deros Backing Pad 150 mm 5/16-Inch - Grip
If the abrasive has started creeping under load, or it drops off when you lift the machine off the work, the pad is finished. Hook and loop wears out before anything else on a sander does. The Mirka Deros Backing...
€52.99 incl. VAT
€43.08 excl. VAT
Mirka Handy Sanding Block with Extraction 80x230mm
Most filler gets flatted by hand, and most of that dust ends up in the room. This is the hand block that takes it away instead. The Mirka Handy Sanding Block with Extraction 80x230mm is Mirka's hand block for putty...
€29.99 incl. VAT
€24.38 excl. VAT
Mirka Interface 81 x 133 mm 54H (5 Pack)
Window frames and panel doors are the work the DEOS 353 was built for, and they are also the work where a bare plate cannot reach the shape. The interface is the foam that fixes that. Mirka Interface 81 x...
€61.99 incl. VAT
€50.40 excl. VAT
Mirka Pad Saver 67 Hole - 150mm
The 150mm backing pad on a Deros 650 is a part you would rather replace once than three times. This is the layer that makes that happen. The Mirka Pad Saver 67 Hole 150mm is a thin sacrificial disc that...
€11.99 incl. VAT
€9.75 excl. VAT
Mirka
€34.99 incl. VAT
€28.45 excl. VAT
Rigalit Dust Bag Fleece for Mirka Dust Extractor 30L (5 Pack)
The bag is what stands between sanding dust and the extractor's filter. Let it blind over and the suction drops long before the drum looks full. Rigalit Dust Bag Fleece for Mirka Dust Extractor 30L is a five pack of...
€34.99 incl. VAT
€28.45 excl. VAT
Mirka Deros Backing Pad 125mm 5/16-Inch - Grip
The backing pad is the most expensive consumable on a sander and the one people run until it stops holding abrasive. Once the hook has gone furry, the disc creeps under load and the sanding pattern goes with it. The...
€59.99 incl. VAT
€48.77 excl. VAT
Mirka Hose for Hand Sanding Blocks 20mm x 4m
The hand sanding blocks take a different hose from the machines. This is the one they take. The Mirka Hose for Hand Sanding Blocks 20mm x 4m is the 20mm extraction hose for Mirka's hand blocks and the hand sanding...
€26.99 incl. VAT
€21.94 excl. VAT
Mirka Deos Backing Pad 81 x 133mm - Grip
The backing pad is the part that wears out quietly. Once the hook and loop stops holding, the abrasive creeps under load and the sanding pattern goes with it. The Mirka Deos Backing Pad 81 x 133mm is the replacement...
€37.99 incl. VAT
€30.89 excl. VAT
Mirka Interface 150mm 67H 10mm (5 Pack)
The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The interface pad is placed between the backing...
€59.99 incl. VAT
€48.77 excl. VAT
Mirka Hose with Connector 27mm x 4m
A sander with the extraction disconnected is just a dust pump. This is the hose that joins the two. The Mirka Hose with Connector 27mm x 4m is an antistatic extraction hose for Mirka machines and extractors that take a...
€69.99 incl. VAT
€56.90 excl. VAT
Mirka Pad Saver 100x152x152mm For DEOS 663 (5 Pack)
On a delta machine all the pressure ends up at the front corner, so that is where the plate dies first. The tip goes furry, the abrasive stops gripping at exactly the point you are using most, and the pad...
€27.99 incl. VAT
€22.76 excl. VAT
Mirka Leros Pad Saver 225mm 25H
Pad saver for Mirka Leros 225mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad...
€28.99 incl. VAT
€23.57 excl. VAT
Mirka Interface 125mm - 33 Hole (1 Pack)
A flat pad on a curved surface touches it in one line. An interface is the foam cushion that makes the abrasive follow the shape instead. The Mirka Interface 125mm 33 Hole goes between the backing pad and a Grip...
€15.99 incl. VAT
€13.00 excl. VAT
Mirka
€47.99 incl. VAT
€39.02 excl. VAT
Mirka Dust Bag Fleece for Mirka Dust Extractor 1230 (5 Pack)
The bag is the cheapest part of a dust extractor and the one protecting the expensive part. Once it blinds over, the filter behind it starts doing the work, and filters cost a great deal more than bags. Mirka Dust...
€47.99 incl. VAT
€39.02 excl. VAT
Mirka Leros Interface 225mm 25H 5mm (1 Pack)
No wall is flat. Plaster rolls, boards meet at a slight step, and a 225mm head run dry on a long pole will find every one of them and leave a mark where it caught. The Mirka Leros Interface 225mm...
€34.99 incl. VAT
€28.45 excl. VAT
Mirka Pad Saver 125mm 33 Hole (1 Pack)
A pad saver is the cheapest insurance on a sander. It is a thin disc that goes between the backing pad and the abrasive, and its only job is to be destroyed instead of the pad. The Mirka Pad Saver...
€11.99 incl. VAT
€9.75 excl. VAT
Mirka Interface 125mm 44H (5 Pack)
Mirka make their 125mm interfaces in two hole patterns, and the one you need is decided by the backing pad on your machine, not by the sander. The Mirka Interface 125mm 44H is the 44 hole pattern, in a five...
€54.99 incl. VAT
€44.71 excl. VAT
Mirka Pad Saver 125mm 33 Hole (5 Pack)
Five pad savers, because one is never the right number of a part you are supposed to throw away. Mirka Pad Saver 125mm 33 Hole in a five pack: 3mm sacrificial discs that sit between the backing pad on a...
€28.99 incl. VAT
€23.57 excl. VAT
Iluka Tools
€73.99 incl. VAT
€60.15 excl. VAT
Iluka Tools Click-On Light for Mirka DEROS II 125/150mm Sander
A powerful, precision-engineered LED accessory designed exclusively for Mirka DEROS II 125mm and 150mm sanders. The Iluka Tools Click-On Light delivers bright, shadow-free illumination directly onto the sanding surface — revealing every imperfection for a flawless finish. Product Overview The...
€73.99 incl. VAT
€60.15 excl. VAT
Mirka Edge Protector for 150mm Deros Sander
Run a 150mm sander along a skirting or into the corner of a reveal and it is the rim of the pad that makes contact. A few passes of that and the edge of the pad is chewed, which is...
€19.99 incl. VAT
€16.25 excl. VAT
Mirka Backing Pad Net 100x152x152mm 32H
On a delta sander the pad takes an uneven beating. The tip does most of the work and wears out first, and once the point stops gripping the abrasive the machine has lost the only thing it does better than...
€49.99 incl. VAT
€40.64 excl. VAT
Iluka Tools
€129.99 incl. VAT
€105.68 excl. VAT
Iluka Tools Click-On LED Light for Mirka Leros Sander
A precision-engineered LED inspection light designed specifically for the Mirka LEROS wall and ceiling sander. The Iluka Tools Click-On LED Light delivers powerful, shadow-free illumination directly onto the surface — exposing imperfections for a flawless, professional finish every time. Product...
€129.99 incl. VAT
€105.68 excl. VAT
Mirka Clean-Up Kit 32mm for Dust Extractors
An M class extractor is the best vacuum on most sites, and most of them spend the day connected to a sander and then watch somebody sweep up with a brush. This is Mirka's clean-up kit for their dust extractors,...
€160.00 incl. VAT
€130.08 excl. VAT
Mirka HEPA Filter for DEXOS Dust Extractors
The standard DEXOS filter holds the machine to M-class, 99.9% of dust. For the work where that is not enough, the Mirka HEPA Filter for DEXOS takes the final filtration to 99.97% at 0.3 microns: the very fine fraction from...
€79.99 incl. VAT
€65.03 excl. VAT
