Osmo Polyx Original Floor Oil - 5ml (Tester)
Hazard informationNot classifiedsafety data sheet available on request (EUH210)
Hazard information
Not classified as hazardous under CLP Regulation (EC) No 1272/2008. No hazard pictogram or signal word applies. The label carries the following statements:
- EUH210: Safety data sheet available on request.
Label warning: Wash out any used cloth impregnated with this product immediately after use or store it in an airtight container (danger of self-ignition).
Read the label and the Safety Data Sheet before use. The SDS is in the Datasheets section on this page. Hazard information taken from the manufacturer's Safety Data Sheet, revision 05.12.2024.
CHECK THE SHEEN AND THE COLOUR SHIFT FIRST
A 5ml sample sachet of Osmo Polyx-Oil Original — enough to coat a test patch roughly the size of a postcard on the timber you actually intend to finish.
There are two things about this product that no screen can show you. The first is sheen: 3062 Matt, 3032 Satin and 3011 Gloss look far more alike in a photograph than they do on a real floor under real light. The second, and the one that catches people out, is that oil darkens timber permanently — a deepened "wet look" that does not fade back as it cures. On oak most people want exactly that. On pale ash, maple or birch it can be a bigger change than expected.
How to sample properly
- Use an offcut of the same timber, or a hidden corner — inside a wardrobe, under a rug line, the back of a board.
- Sand it exactly as you will sand the real job: P120–150 for floors, P180–240 for furniture. A patch sanded finer than the finished job will not predict the result.
- Apply thinly along the grain, leave 8–10 hours, then apply the second coat — two coats is what the finished job gets, and one coat looks different.
- Judge it in daylight and from a standing height, not up close. Sheen reads completely differently at floor distance.
If you are choosing between two sheen levels, order both. At €3.99 a sachet it is a great deal cheaper than finishing a room in the wrong one.
At a glance
- Finishes: 3062 Matt, 3032 Satin, 3011 Gloss.
- For: interior wooden floors, furniture and worktops. Not for exterior use.
- Coats: 2 on bare timber, 1 to refresh.
- Coverage: 24 m²/L per coat.
- Drying: 8–10 hours between coats. Fully cured in 2–3 weeks.
- Apply with: flat brush, floor brush, hand pad or microfibre roller.
- Sanding: floors to P120–150, furniture to P180–240. Max 18% moisture content.
- Safe for children's toys once cured (EN 71-3), saliva-resistant and sweatproof.
- Sizes available: 5ml tester, 750ml, 2.5L.
Supporting Documentation
Full surface preparation, application detail, timber suitability and safety information:
Decided? 750ml covers furniture, worktops and small floors. 2.5L covers a full room.
Ireland & Northern Ireland — 1–3 working days. Charged by total order weight, VAT included:
- Up to 30 kg — €6.99, or free on orders over €85
- 30–60 kg — €13.99
- 60–100 kg — €27.99
- Over 100 kg — pallet delivery €49.99
Great Britain — 2–4 working days. €13.95 up to 30 kg, then €27.90, €55.90 and €99.90 by the same weight steps. There is no free delivery to Great Britain.
Rest of Europe — non-liquid items only, from €11.75, priced by destination and weight at checkout. Paint and other liquids ship to Ireland, Northern Ireland and Great Britain only.
Dispatch and collection — in-stock orders placed before 12pm Monday to Friday ship the same day. Click & collect at Ballymount, Dublin 12 is free and often ready within the hour.
Returns — 14 days to change your mind and 14 more to send it back. Tinted paint is non-returnable once mixed.
