Net-Trol is a powerful wood cleaner and brightener that restores greyed and weathered wood to its natural colour without damaging the wood’s fibres. It removes both surface and ground-in dirt, leaving wood looking bright and vibrant. With its fast-acting formula, it can restore the original colour of wood in as little as 15 minutes, eliminating the need for laborious sanding.

Key Benefits

• Safe for all exterior wood types and excellent for tropical hardwoods to allow finishes like Deks Olje D1 to penetrate.
• Removes stains caused by tannin bleed, mildew, pollution, and UV rays.
• Neutralises wood surfaces stripped with products like Dilunett or Prepdeck, preparing them for your chosen finish.
• Restores faded plastics, removes rust stains, and cleans discoloured stone, cement, and paving slabs.
• Biodegradable, solvent-free, and bleach-free. Safe for plants and shrubs, making it perfect for garden use.

Ideal Uses

• Reviving fence panels and greyed garden furniture.
• Restoring the colour of decking and cladding.
• Brightening plastic guttering dulled by UV rays.
• Removing rust stains from cement and brickwork.
• Cleaning paving slabs, driveways, and tannin bleed stains.

Application Instructions

General Tools Needed

• Soft brush, stiff bristle/nylon brush, or pressure washer.
• Wear chemical-resistant gloves, safety goggles, and protective clothing.

Caution: Surfaces may become slippery when wet. Rinse painted surfaces or metal fixings quickly to avoid dulling.

For Wood

1. Wet the surface with clean water.
2. Apply Net-Trol with a synthetic brush or roller.
3. Scrub with a stiff nylon brush.
4. Let stand for 10-20 minutes (keep damp if drying occurs).
5. Rinse while scrubbing or use a pressure washer (max. 60 bar).
6. Repeat if necessary and allow to dry for 48 hours before finishing.

For Stone or Concrete

1. Wet the surface with clean water.
2. Apply Net-Trol with a synthetic brush or roller.
3. Scrub with a stiff nylon brush.
4. Let stand for 10-20 minutes (keep damp if drying occurs).
5. Rinse while scrubbing or use a pressure washer.
6. Allow to dry before applying your chosen finish or sealer.

For Nail Stains

1. Clean the surface, then wet with clean water.
2. Apply Net-Trol over and around the nail stain.
3. Do not rinse until the stain disappears.

For Plastic or GRP

1. Wet the surface with clean water.
2. Apply Net-Trol with a brush.
3. Let stand for 10 minutes.
4. Scrub with a soft/medium nylon brush.
5. Rinse with plenty of clean water.

For Rust Stains

1. Wet the surface with clean water.
2. Apply Net-Trol with a stiff nylon brush, working it into the stain.
3. Let stand for 10 minutes.
4. Scrub and rinse with plenty of clean water.

Clean-Up

• Clean all tools with soap and water.

After Care

• Protect and enhance the natural beauty of your wood with Owatrol wood finishes.

Important Tips

• Shake the container thoroughly before use.
• Cover areas you want to protect.
• Wet surrounding plants and shrubs.
• Apply between 5˚C and 35˚C. Avoid hot surfaces to prevent quick drying.
• For vertical wood, work bottom to top to avoid streaking.