Junoretano 2K Polyurethane Enamel Paint
Hazard informationDangerFlame (GHS02), Exclamation mark (GHS07), Health hazard (GHS08) · two components
Hazard information
Two-component product. The hazard information for each component is given below.
Component A (base)
Signal word: Warning
Hazard pictograms: Flame (GHS02), Exclamation mark (GHS07), Health hazard (GHS08)
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
- H373 (Oral): May cause damage to organs through prolonged or repeated exposure (oral).
- H412: Harmful to aquatic life with long lasting effects.
Supplemental label information:
- EUH211: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Contains: xylene; ethylbenzene; reaction mass of ethylbenzene and m-xylene and p-xylene; maleic anhydride
Component B (hardener)
Signal word: Danger
Hazard pictograms: Flame (GHS02), Exclamation mark (GHS07), Health hazard (GHS08)
- H226: Flammable liquid and vapour.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H336: May cause drowsiness or dizziness.
Supplemental label information:
- EUH204: Contains isocyanates. May produce an allergic reaction.
Read the label and the Safety Data Sheet before use. The SDS is in the Datasheets section on this page. Hazard information taken from the manufacturer's Safety Data Sheet, component A revision 28.07.2022, component B revision 11.07.2022.
Juno Junoretano 2K Polyurethane Enamel Paint is a two-component aliphatic polyurethane topcoat that goes straight onto concrete floors, metal and wood; Satin and Gloss also onto uPVC, fibreglass-reinforced polyester and ABS. In Matt, wood is interior only. Colours mix on the Junomatic system to any RAL or NCS colour. Matt comes in 1L and 4L, Satin and Gloss in 1L, 4L and 15L.
In every finish: interior or exterior work, touch dry in 2 hours, maximum recoat window 7 days. Coverage at 50 dry microns is 11 m²/L a coat in Satin and Gloss, 10 to 11 m²/L in Matt. That is about 44 m² from a 4L, 165 m² from a 15L, less on porous or textured substrate. Pot life is 8 hours once mixed.
What differs between the finishes
- Matt (code 88801): recoat from 24 hours. Thin with D-71. Roller, brush for small touch-ups only. Mix 9:1 by volume, 10:1 by weight.
- Satin (code 88872): recoat from 6 hours. Mix 8:1 by volume, 9.5:1 by weight.
- Gloss (code 88880): recoat from 6 hours. Mix 7:1 by volume, 9:1 by weight.
Satin and Gloss add the duty ratings the Matt sheet does not claim: industrial and marine environments, pools, industrial concrete floors and sports facilities, and resistance to UV, oils, lubricants, solvents, aggressive chemicals and dry heat to 150°C.
Rest the mixed paint 30 minutes and stir again before you start. Thin Satin and Gloss 5 to 10% with D-70 for conventional spray, to 20 to 30 seconds on a Ford Cup No. 4, or 0 to 5% with D-70 or D-71 for airless and airmix at 150 to 170 kg/cm². Clean up with D-70; Gloss takes D-71 for brush work. On iron and steel, prime first with Dynapok 2C Primer (code 22.722).
Certification, finish by finish
- Environmental Product Declaration (EPD), published by Juno for Junoretano.
- Fire reaction B-s1,d0 to EN 13501-1: all three.
- Slip resistance Class 3 to UNE-ENV 12633 Annex A: all three, but only with Juno anti-slip microbeads (code 07250), ordered separately.
- Corrosivity C-4 and C-5 to ISO 12944-6: Gloss only, tested at Tecnalia as a finish coat in a system: C-4 low, high and very high durability, C-5 medium and high. It certifies the system, not the topcoat alone.
Conditions and substrate limits
- Above 15°C, relative humidity 75% maximum: through application and the whole cure. Substrate at least 3°C above dew point, no condensation.
- Concrete moisture below 4%: meter it. Tensile strength at least 15 kg/cm², compressive strength over 25 N/mm².
- Timber moisture 15% maximum, Satin and Gloss: the Matt sheet gives no timber figure. No rising damp, in any finish.
- Not in rain or strong wind, and not on wet or sun-heated surfaces.
- Not on asphalt: not recommended in any finish.
We can match virtually any colour from most major paint brands. Simply provide the brand name and colour name when placing your order. Our tinting system supports colours from Farrow & Ball, Little Greene, Colourtrend, and many more.
Deep, vibrant, and dark colours may require additional pigment, so a colourant surcharge may apply. We’ll always contact you to confirm any extra charge before tinting your paint.
Ireland & Northern Ireland — 1–3 working days. Charged by total order weight, VAT included:
- Up to 30 kg — €6.99, or free on orders over €85
- 30–60 kg — €13.99
- 60–100 kg — €27.99
- Over 100 kg — pallet delivery €49.99
Great Britain — 2–4 working days. €13.95 up to 30 kg, then €27.90, €55.90 and €99.90 by the same weight steps. There is no free delivery to Great Britain.
Rest of Europe — non-liquid items only, from €11.75, priced by destination and weight at checkout. Paint and other liquids ship to Ireland, Northern Ireland and Great Britain only.
Dispatch and collection — in-stock orders placed before 12pm Monday to Friday ship the same day. Click & collect at Ballymount, Dublin 12 is free and often ready within the hour.
Returns — 14 days to change your mind and 14 more to send it back. Tinted paint is non-returnable once mixed.
Frequently bought together
Trade price applied at checkout
