QUICK DRYING SURFACE FINISHING, FILLING & JOINTING:
Suitable for interior use and ready to overpaint in just 3 hours. Easy to sand and apply in one coat with no shrinkage and no depth limit. Conforms to BS EN 13963 for jointing applications.
The typical recommended application thickness for plasterboard skimming and jointing is 0.5mm. This product can also be used for more substantial levelling applications.
Surface condition - Interior
Task - Jointing plasterboard, Skimming plasterboard, Filling and repairing (holes, gaps, cracks)
Application method - Manual
Time between coats - 1 Hour
Surfaces - Gypsum, plaster board, old painted surfaces, cement, concrete, cellular concrete, primed wood
Overcoat with - Any type of filler, paint or wall coating. Do not coat directly with polyurethane paints nor epoxy solvent based paints.
Maximum recommended application thickness - No depth limitation
Ready to paint time - 3 Hours
Working time - 40 min.
Application tools - Filling knife
Blade. - Trowel.
Blade. - Trowel.
Recommended temperature and humidity for application - Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion - Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness) - 1100.00
IAQ (Indoor Air Quality) classification - A+
Colour when dry - White
Guarantee - Product guaranteed for 12 months from purchase, in original package and stored away from humidity
Clean tools with - Water.
Pack sizes
- Bag 5 KG
- Bag 10 KG
