Rapid Shipping: Click, Shop, Receive. It's that quick!

Osmo Anti-Slip Decking Oil 430 Clear Satin, 2.5L

Osmo
€105.99 incl. vat

NO MORE SLIP UPS

  1. Clear, satin top coat for coloured Osmo Decking Oils.
  2. Contains a special highly compressed organic non-slip granule
  3. Natural wood character remains visible
  4. Furnished with active ingredients to protect the coating against mould, algae and fungal attack.
  5. Highly water and dirt resistant
  6. Microporous, penetrating finish which does not crack, peel or flake
No sanding necessary when topping up coating
FINISH Clear Satin
APPLICATION TOOS Osmo Decking Brush RECOMMENDED USE As a top coat for coloured Osmo Decking Oil or Natural Oil Woodstain RECOAT One coat, when signs of wear become visible SIZES 125ml, 750ml, 2.5L DRY TIME 12 hours
CLEAN UP Osmo Brush CleanerCOVERAGE 24m²/L with one coat COATS 1 coat (as a top coat over one coat of coloured Osmo Decking oil or Natural Oil Wood Stain only) CARE
Osmo Decking Cleaner
 
SURFACE PREPARATION
We recommend a base coat with a coloured Osmo Decking Oil, such as: Osmo Bangkirai-Oil, Larch-Oil or Douglas Fir Oil or Osmo Natural Oil Woodstain. Before applying an Osmo coloured base coat ensure the bare wood species has been properly prepared. Please refer to the coloured Osmo Decking Oil product for more guidance on wood species preparation. Osmo Anti-Slip Decking Oil 430 top coat acts as protection against weathering and extends the life of the coating. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Anti-Slip Decking Oil 430 is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. For renovation works, clean existing, intact Osmo Decking oils thoroughly with diluted Osmo Decking Cleaner. De-grey and clean already greyed or weathered wood at the same time with Osmo Wood Reviver Power-Gel and rinse well. Avoid using jet / power washers to clean as this can be detrimental to the existing coating and reduce coverage of an Osmo finish. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
METHOD OF APPLICATION
With Osmo Flat Brush, apply thinly along the wood grain and spread well. For quicker application on larger areas, we recommend our Osmo Decking Brush (150 mm) which is tailored for decking and allows you to work ergonomically. Spread well and evenly. Allow to dry for approx. 12 hours under good ventilation. For renovation works, one coat applied to the clean and dry surface is usually sufficient.
NOTE
Osmo Anti-Slip Decking Oil 430 is clear satin and therefore it offers only limited protection against UV radiation (greying). With a combination of a coloured base coat and a top coat with Osmo Anti-Slip Decking Oil 430, your decking is fully protected. Osmo Anti-Slip Decking Oil 430 is not suitable for a single product application. Oils enhance the natural colour tone of wood (permanent wet effect). To avoid greying and declining non-slip effect on high traffic areas, these areas should be cleaned and recoated at the right time. If the greying process has already begun, de-grey the surface with Osmo Wood Reviver Power-Gel, rinse well then recoat. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.
CARE
Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth) . Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
RECOMMENDED
For all other wood types not mentioned, always trial apply first. Osmo Anti-slip Decking Oil 430 is intended as a clear satin top coat over a base coat of coloured Osmo Decking Oil.
  1. Oak
  2. Beech
  3. Ash
  4. Alder
  5. Birch
  6. Larch: Decking-Oil 009 Larch is optically suitable.
  7. Thermowood: Decking-Oil 010 Thermowood is optically suitable.
  8. Garapa: Decking-Oil 013 Garapa is optically suitable.
ALSO RECOMMENDED
For the following wood types, WR Base Coat is recommended before use.
  1. Pine
  2. Spruce
  3. Douglas Fir: Decking-Oil 013 Garapa is optically suitable.
  4. Accoya
  5. Kebona
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Osmo Anti-Slip Decking Oil 430 Clear Satin, 2.5L
€105.99 incl. vat €86.17 excl. vat
You have successfully subscribed!
This email has been registered
Newsletter

Welcome to Shopify Store

I act like:

Select Country: