Fluxaf Graffi Clean 500ml

Waterbased graffiti remover is suitable for removing most kinds of graffiti, markers, ink, chewing gum from almost all surfaces in one step. It does not contain any acids, lye, dangerous solvents (as NMP) or preservatives.

GRAFFI-CLEAN can be used against many types of pollution.
For removing graffiti, based on :
oil paints, alkyd enamels
latex and other waterbased paints
stoving enamels
acrylic based paints
spray paints (car- and leatherpaint)
Also suitable for the removal of :
chewing gum
undesirable posters
markers, pen, wax
and many other things!

GRAFFI-CLEAN!® does not require any before or after treatment. GRAFFI-CLEAN!® can be used on almost any type substrate. When used properly the substrate will not be damaged. Wood, stone, marble etc. will not discolour and also almost all types of plastic will not be effected. Metals can, as always, be affected. The correct action period is essential. The longer GRAFFI-CLEAN!® is left on, the deeper it will penetrate the top level and (eventually) the lower level(s). Try to remove a small part of the contamination on a suitable test area.

Spray GRAFFI-CLEAN!® on the area which needs cleaning.

Remove the graffiti with a hard brush, water (possible high pressure), a clothe or a cleaning rag. Do not use steel-wool for removal as this can result in rust. A stainless steel sponge is suitable. We always recommend treatment of a test area first. For more porous substrates these times can be longer, than smooth substrates. If you want to remove graffiti without damaging the layer of paint underneath, spray GRAFFI-CLEAN!® on and remove after a few seconds with a moist cloth.

On very delicate substrates, spray GRAFFI-CLEAN!® on a moist cloth and gently wipe the area. Remove with water after a few seconds.