SURFACE PREPARATION

Remove debris from greyed wood with a stiff brush or broom; afterwards dampen with water.
Wood Reviver Power-Gel is ready to use. Do not thin.
Perform a trial application before treating wood with Wood Reviver Power-Gel.

METHOD OF APPLICATION

Generously apply the gel along the wood grain. After approx. 20 minutes reaction time, clean surface with Osmo Decking Cleaning Brush and rinse with plenty of water. Avoid pressure / jest washers for cleaning as they can significantly increase absorbency of  some timbers ( eg soft timbers) . After drying for approx 2-3 days in clement weather conditions, protect the newly refreshed wood with a wood finish (e.g. for decks – Osmo Natural Oil Woodstain or Osmo Decking-Oils). Check the moisture content of the wood is less than 20% RM prior to applying an Osmo wood finish.
For machine processing on decking, we recommend using the Osmo Wood Orbiter.

NOTE

Osmo Wood Reviver Gel is most effective when applied onto bare, untreated timber. Existing treatments may block the revival process – always trial apply first. Protect/cover sensitive surfaces such as: plants, metallic components ( eg aluminium), sensitive stones and renders. After treatment the dried wood may appear quite light in colour. The fully refreshed colour of the wood should be revealed following the application of an Osmo finishing oil

PRODUCT CODE
6609

APPLICATION TOOL
Osmo Decking Cleaning Brush

RECOMMENDED USE
Exterior wood surfaces

SIZES
500ml, 2.5L, 5L

DRY TIME
24-48 hours

CLEAN UP
Immediately after use, with soap and water

COVERAGE
10m²/L with one application, depends on condition of the wood

COATS
1 coat, repeat if necessary