Free Delivery | On all orders over €60

Next Day Delivery | Ireland & Northern Ireland

Returns | Simple, Hassle Free Returns

Osmo Furniture Top Oil 3058 CLEAR MATT 500ml

22.60 inc VAT: 27.80

Out of stock


  1. Food safe (EN 1186)
  2. Safe for use on children’s toys (EN 71.3)
  3. Extremely water and chemical resistant
  4. Very durable and hardwearing
  5. Resistant to common liquid spillages such as water, juice, tea, cola and wine
  6. Saliva-resistant and sweatproof, suitable for children’s toys
  7. Microporous, breathable finish which does not crack, peel or flake
  8. No sanding necessary for spot repairs or future applications

Out of stock



Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo TopOil is ready to use. Do not thin. Stir well before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
Sand wood surfaces carefully. Begin with coarse sandpaper then progress to finer grades– final sanding work for furniture P150-240 (depending on wood species ). For kitchen work tops using absorbent hardwoods like Oak or Beech, final sanding grade P120. For very absorbent woods like Pine, sand to a maximum of P150.

For dark and extractive-rich woods (e.g. Iroko, Teak, Mahogany, Sapele, Wenge, Merbau, Jatoba, Cedar etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.

Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.


Apply the first coat thinly along the wood grain with an Osmo Microfibre Roller, Flat Brush or Oil Finish Applicator Fleece.
Allow to dry for approx. 8-10 hours. Ventilate well while drying.
Apply the second coat with an Osmo Oil Finish Applicator Fleece or a lint-free cloth.  Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.
For renovations, one coat applied to the clean and dry surface with an Oil Finish Applicator Fleece or lint-free cloth is usually sufficient.

Clear (Matt), Clear (Satin), Natural (Matt), Acacia (Matt), White (Satin), Terra (Satin), Graphite (Satin)

Osmo Flat Brush, Microfibre Roller or Hand Pad

Kitchen wooden worktop and tables

One coat, when signs of wear become visible

5ml, 125ml, 500ml

Always remove white pigments of 3068 before leaving to dry


Go to Top